BUPI CLEANER® POWERTEC KLT TWO-TANK CLEANING SYSTEM WITH LIFTING GATE

The BUPI CLEANER® POWERTEC KLT cleaning system series is characterised by its exceptionally space-saving, compact design and its simple handling. The small load carriers (Kleinladungsträger; KLT) are pushed into the cleaning cage by hand.

During the cleaning process, the containers rotate horizontally in the cleaning chamber. They are sprayed on from three sides with a hot cleaning agent at high pressure and flow rates, then rinsed and finally blow-dried with hot air.

For loading or unloading of cages in parallel with a cleaning process, loading and unloading of the cleaning system can be prepared using several feeder carts. This nearly doubles the system’s capacity.


Facts

  • Two-tank spray cleaning system for water-based
    cleaning agents
  • For cleaning transport and small load containers (KLT)
  • Container cleaning from the smallest boxes to standard palette cages
  • Space-saving
  • Eco-friendly
  • Rugged design
  • Reliable and long-lived
  • Flexible spatial configuration with height-adjustable, removable shelves
  • Integrated hot-air dryer
  • Small footprint (2.7 x 2.3 m)
  • Low costs for purchase and operation
  • High-efficiency high-power Grundfos pumps IE3/IE4
  • Electrical and control equipment from Siemens
  • All components in contact with fluid in stainless steel
  • Return line filtration

Equipment characteristics

  • Two-tank cleaning system
  • High-efficiency high-power Grundfos pumps IE3/IE4
  • Electrical and control equipment from Siemens
  • All components in contact with fluid in stainless steel
  • Return line filtration
overall dimensions approx. (without additional equipment)size 5
Width2,700 mm
Depth2,250 mm
Overall height2,950 mm
Total height with open loading gate3,900 mm
Transfer height (upper edge grating)880 mm
Usable dimensions L x W x H1,200 x 1,000 x 1,200 mm
Load weight (payload) standard200 kg
Load weight (payload) max.300 kg
Total system weight1,900 kg
power supply (without additional Equipment)
Voltage (three-phase)400 V
Frequency50 Hz
Control voltage24 VDC
Installed load49 kW
Maximum current drain71 A
spray cleaning system – CLEANING/RINSING
Spray pressure at nozzle mouth5.0/4.8 bar
Number full jet nozzles mounted80/60 pcs.
pump data – Cleaning/Rinsing
Circulation rate30.2/27.0 m³/h
Pumping head in mWS52/42 mWS
Pumping head in kPa520/420 kPa
Pump motor7.5/5.5 kW
Electric heater – Cleaning/Rinsing
Capacity tanks550/550 l
Power electric heater18/18 kW
Continuous treatment temperature control0–80° C
Warm-up period tanks from 15 to 70° Capprox. 2 hours
×

Variants

  • POWERTEC KLT Lifting Gate
    • big lots
    • short cleaning cycles
    • operator relief (ergonomics)